Roller ShuttersView All Images
Pressford roller shutters are all manufactured in house with high quality steel. We have a dedicated roller shutter team that works solely on manufacturing suppling and fitting. Because we manufacture we have quick turn around times and competitive prices. Our roller shutters are all CE marked and adhere to current British and European regulations. We offer a range of roller shutters that range from domestic garages to commercial businesses to agricultural sheds and barns. Roller shutters is were we first started and are proud to have served the industry for over 30 years. Please find below a standard spec for a commercial type roller shutter.
Constructed from 76mm curved section galvanised steel laths with pressed steel endlocks fitted to alternate laths to prevent lateral movement.
Galvanised steel inverted “tee” section, L section or Aluminium bottom rail
The side guides are formed from galvanised steel channels and prepared for fixing to the opening structure by means of continuous fixing angles.
Fabricated from galvanised steel of adequate thickness relative to door size and supplied with angles for fixing to the structure
The roller is manufactured from mild steel tube of sufficient diameter and wall thickness to resist deflection and is mounted in bearings or cups on each end plate
The majority of
parts are galvanised with other parts prime painted. They are also available in polyester powder coating in a range of standard RAL colours at extra cost.
35 kgs per m².
Electrical operation is by means of a single phase tubular motor or three phase industrial motor. A safety brake is fitted to all shutters where personnel could pass underneath thus meeting all relevant Health & Safety requirements are met. The client should provide a fused spur within 1m of the motor position.
The standard method of control is by means of internal wall-mounted rocker switch. Other types of control including keyswitches and group controls are available at extra cost.
Casings fabricated from galvanised steel sheet are available if required. Usually if shutter is external or reverse roll.